TThe Traveling Tradesman
← All trades
M

Millwright

No state licenses millwrights. What governs the trade is a Department of Labor-registered apprenticeship — typically four years and 8,000 hours, most often through the Carpenters — and that certificate is federally registered, which means it works everywhere without a transfer process. Entry is the hard part rather than the paperwork: acceptance rates into millwright programs are low, and many locals want a letter of intent to hire from a signatory contractor before they'll process you.

Across all states: millwright is not a state-licensed occupation in any US state. It is a registered-apprenticeship trade - millwrights appear in state apprenticeship directories (Oregon BOLI, Wisconsin DWD, Minnesota DLI all list millwright as a registered apprenticeship occupation) rather than in state licensing rosters. The governing credential is completion of a U.S. Dept. of Labor-registered apprenticeship, typically 4 years / 8,000 hours of on-the-job training plus a minimum 144 classroom hours per year, most commonly sponsored by the United Brotherhood of Carpenters (millwrights are organized under the Carpenters' regional councils). That DOL certificate is federally registered and portable nationwide - the same pattern as AWS for welders, nicet for sprinkler fitters, NEIEP for elevator mechanics, and IBEW for linemen elsewhere. Millwrights install and align heavy industrial machinery, conveyor systems, monorail systems, and electric generators; the work requires precision drilling, tapping, welding, and bolting. Entry is competitive - Oregon's own materials note acceptance rates into millwright programs are low, and many locals require a letter of intent to hire from a signatory contractor. Veterans using Helmets to Hardhats may receive direct entry.

Where can I take my millwright license?

Pick the state you're licensed in. You'll get the states that will consider that license — which is not the same as a free transfer.

FAQ

Do I need a license to work as a millwright?

No — not in any state, and there's no reciprocity question to answer because there's no state license to transfer. Your DOL apprenticeship certificate is federal and portable by design, which puts you ahead of most licensed trades on mobility. What you should check before you move is whether the local in your new area is taking applicants. Two adjacent credentials matter more than any license: if your work involves welding, AWS certification governs it and is employer- and code-driven; and if you're doing electrical connection work, that pulls you into the electrician licensing of whatever state you're standing in.

Millwright rules in every state

Researched 2026-07-21 to 2026-07-24

One entry per state, in alphabetical order. Each one covers who licenses the trade there, what it takes to qualify, and whether that state accepts a license earned somewhere else.

What the colors mean
  • Reciprocity — accepts some out-of-state licenses
  • No reciprocity — licensed here, but no out-of-state license is accepted
  • Nothing to reciprocate — no state license exists here
  • Not established — we could not verify this state's position — treat it as an open question, not a no
  • secondarydrawn from consistent secondary sources, not confirmed on the agency's own page

Alabama

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Alabama regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Alabama's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Alabama does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Alabama issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Alabama→

Alaska

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Alaska regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Alaska's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Alaska does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Alaska issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Alaska→

Arizona

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Arizona regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Arizona's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Arizona does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Arizona issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Arizona→

Arkansas

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Arkansas regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Arkansas's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Arkansas does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Arkansas issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Arkansas→

California

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. California regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is California's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

California does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because California issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in California→

Colorado

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Colorado regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Colorado's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Colorado does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Colorado issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Colorado→

Connecticut

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Connecticut regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Connecticut's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Connecticut does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Connecticut issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Connecticut→

Delaware

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Delaware regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Delaware's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Delaware does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Delaware issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Delaware→

Florida

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Florida regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Florida's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Florida does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Florida issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Florida→

Georgia

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Georgia regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Georgia's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Georgia does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Georgia issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Georgia→

Hawaii

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Hawaii regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Hawaii's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Hawaii does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Hawaii issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Hawaii→

Idaho

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Idaho regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Idaho's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Idaho does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Idaho issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Idaho→

Illinois

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Illinois regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Illinois's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Illinois does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Illinois issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Illinois→

Indiana

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Indiana regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Indiana's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Indiana does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Indiana issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Indiana→

Iowa

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Iowa regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Iowa's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Iowa does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Iowa issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Iowa→

Kansas

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Kansas regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Kansas's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Kansas does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Kansas issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Kansas→

Kentucky

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Kentucky regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Kentucky's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Kentucky does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Kentucky issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Kentucky→

Louisiana

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Louisiana regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Louisiana's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Louisiana does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Louisiana issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Louisiana→

Maine

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Maine regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Maine's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Maine does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Maine issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Maine→

Maryland

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Maryland regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Maryland's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Maryland does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Maryland issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Maryland→

Massachusetts

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Massachusetts regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Massachusetts's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Massachusetts does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Massachusetts issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Massachusetts→

Michigan

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Michigan regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Michigan's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Michigan does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Michigan issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Michigan→

Minnesota

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Minnesota regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Minnesota's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Minnesota does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Minnesota issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Minnesota→

Mississippi

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Mississippi regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Mississippi's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Mississippi does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Mississippi issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Mississippi→

Missouri

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Missouri regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Missouri's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Missouri does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Missouri issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Missouri→

Montana

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Montana regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Montana's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Montana does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Montana issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Montana→

Nebraska

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Nebraska regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Nebraska's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Nebraska does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Nebraska issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Nebraska→

Nevada

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Nevada regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Nevada's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Nevada does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Nevada issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Nevada→

New Hampshire

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. New Hampshire regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is New Hampshire's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

New Hampshire does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because New Hampshire issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in New Hampshire→

New Jersey

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. New Jersey regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is New Jersey's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

New Jersey does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because New Jersey issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in New Jersey→

New Mexico

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. New Mexico regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is New Mexico's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

New Mexico does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because New Mexico issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in New Mexico→

New York

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. New York regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is New York's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

New York does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because New York issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in New York→

North Carolina

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. North Carolina regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is North Carolina's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

North Carolina does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because North Carolina issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in North Carolina→

North Dakota

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. North Dakota regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is North Dakota's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

North Dakota does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because North Dakota issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in North Dakota→

Ohio

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Ohio regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Ohio's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Ohio does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Ohio issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Ohio→

Oklahoma

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Oklahoma regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Oklahoma's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Oklahoma does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Oklahoma issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Oklahoma→

Oregon

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Oregon regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Oregon's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Oregon does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Oregon issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Oregon→

Pennsylvania

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Pennsylvania regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Pennsylvania's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Pennsylvania does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Pennsylvania issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Pennsylvania→

Rhode Island

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Rhode Island regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Rhode Island's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Rhode Island does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Rhode Island issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Rhode Island→

South Carolina

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. South Carolina regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is South Carolina's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

South Carolina does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because South Carolina issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in South Carolina→

South Dakota

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. South Dakota regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is South Dakota's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

South Dakota does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because South Dakota issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in South Dakota→

Tennessee

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Tennessee regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Tennessee's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Tennessee does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Tennessee issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Tennessee→

Texas

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Texas regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Texas's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Texas does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Texas issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Texas→

Utah

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Utah regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Utah's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Utah does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Utah issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Utah→

Vermont

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Vermont regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Vermont's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Vermont does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Vermont issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Vermont→

Virginia

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Virginia regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Virginia's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Virginia does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Virginia issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Virginia→

Washington

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Washington regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Washington's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Washington does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Washington issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Washington→

West Virginia

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. West Virginia regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is West Virginia's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

West Virginia does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because West Virginia issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in West Virginia→

Wisconsin

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Wisconsin regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Wisconsin's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Wisconsin does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Wisconsin issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Wisconsin→

Wyoming

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for millwrights. Wyoming regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Wyoming's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license. Registered apprenticeship: 4 years, 8,000 hours OJT, minimum 144 classroom hours annually, 18+ with high school diploma or GED. Welding and machining certifications are commonly pursued alongside. Note that a millwright performing WELDING may need employer- or code-driven AWS/ASME certification, and a millwright doing electrical connection work would need that state's electrical credential - see this dataset'S welder and electrician records.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Wyoming does not license millwrights - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer.

What applies instead: Because Wyoming issues no millwright license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Wyoming→